LAUNCH X431 PRO Elite OBD2 Scanner 2023 New Bidirectional Scan Tool with CANFD DOIP, ECU Online Coding,Full System,32+ Resets,Key Program,VAG Guide

LAUNCH X431 PRO Elite Bidirectional Scan Tool(Same as X431 PROS V +), 32+ Reset for Most Cars,ECU Online Coding,Key IMMO,OEM Full System Diagnostic,2 Years Free Update,same as X431 V,X431 PROS,X431 V+ 4.0.

1. 2023 ADVANCED OE-LEVEL FUNCTIONS: Guided Functions + Variant Coding (Offline Programming) + AutoAuth for FCA SGW+ Online Coding + Power Balance + Component Matching + Flash Hidden Functions + Anti-theft IMMO Service + Setting & Changeover +Modification +Offline Coding + Initialization+Adaptation+ Matching+ +Customization + Personalization
2. More Than 32 Resets FUNCTIONS: fix 99% of car-related maintenance issues.NEW ADDED MAINTENANCE FUNCTIONS: GPF Regeneration, High Voltage Battery Health Test, RESET Program(Extension).
3. Wireless & intelligent Diagnosis + OE-level All Systems Diagnostics: Conduct diagnostics through Bluetooth adapter so as to set you from entangled wires. You can easily get the VIN information of the car, and do a full scan for your car & get a diagnostic health report. Launch X431 Pro Elite scan tool is designed to troubleshoot all systems, Retrieve the tested ECU information/Read & erase Diagnostic Trouble Codes, and pinpoint the trouble area. View the Live Data.
4. Active Test (Bi-directional Control): Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.
5. ECU Coding (Online Coding): Match, learn, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacement.
6. Key Programming: Add, Delete & Reprogram K eys, >>Rewrite smart keys, All smart keys lost, Replace smart k ey ECU, Replace KNOB IGNITION;>>Reset Key: Relearn a key.
7. Auto VIN Scan + One Click Update + Diagnostic Report + Diagnostic Feedback
8. More Than 150 Brands and 20000+ Cars supported + 25 Languages + 2 Years Update
9. Online Maintenance Resources: Operating skills, DTC Help, Automotive Technology handbook, Repair Case and How-to Videos.
10. For 2017 and later FCA Vehicles with Secure Gateway Module (SGW) Register with AutoAuth to enable your LAUNCH X431 PRO ELITE tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable. ( Extra charge is needed To Access)

2023 Added Functions, More Extended Functions Make Work Easier

1. ADAS Calibration: Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
2. For 2017 and later FCA Vehicles with Secure Gateway Module (SGW): Register with AutoAuth to enable your LAUNCH X431 PRO ELITE tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable.
3. VAG Guided Functions for Audi, Volkswagen Skoda and Seat, etc: On-Screen Instruction step by step, LAUNCH X431 PRO ELITE Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function, you don't need to rely on a mechanic’s suggestion all the time.**NO extra costs to use the VAG Guided Functions on LAUNCH X431 PRO ELITE.
4. Open the Hidden Features: Make full use of hidden features or disable the car’s annoying functions. 3-Time Flasher Setting, Auto L ock/Unl ock Function, one-touch signal flickers, deactivate some buzzing sounds, needle sweep,rear-view mirror folding, disable daytime running light, disable seat belt alarm beep, remove maximum speed limiter,etc.
5. (PMI) Programmable Module Installation: LAUNCH X431 PRO ELITE Support PMI function, Compatible with Ford /Lincoln/ Mazda etc. This function is used when you need to replace a module (replace E~CU) or initialize a module.No need to use the J2534 or buy a subscription
6. Power balance Test: Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power, or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing is one of the best and easiest ways to find the source of an engine misfire. Furthermore, cylinder power balance testing is often used along with cylinder compression and cylinder leakage tests to further pinpoint the problem.
7. Key Programming: Add, Delete & Reprogram Keys, Rewrite smart k eys, Replace smart key E~CU, Replace KNOB IGNITION; Reset Key: Relearn a key.
8. Tons of Actuator Test (Functional Test): Turn ON/OFF Front and Rear side ACM Solenoid, turning the fuel pump on and off, cycle the a/c, clutch on and off, Left clutch electromagnetic co il test, Acceleration Device Test, Oil Pressure Control Test, DYNAMIC camera aiming, Vehicle level position calibration, Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Botors, Wheel Speed Sensor Supply, PARKING BRAKE tests (Vary by car, Hundreds of actuation test functions)

LAUNCH X431 PRO ELITE is a professional diagnostic scan tool to diagnose full systems in all vehicle systems on ECU:

• ECU CODING:

1. Same as other LAUNCH X431 High-end OE-level scan tools, LAUNCH X431 PRO ELITE has the capability of ECU coding to change preprogrammed options in the software, helping you customize your car faster as needed.
2. Optimally code your car by changing some settings to fit your needs, such as setting alarms, door locks, etc.
3. Access the E~CU to make full use of the hidden features or disable the car’s annoying functions, like 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirrors folding function 5. disable auto start-stop .6. Remove/change the Speed Limit
4. Provide excellent solutions for issues of drivability, power loss, fuel efficiency, etc. to improve the car's performance.
5. Reprogram the adaptive data for certain components after repairs or replacements.

• ACTIVE TEST (BI-DIRECTIONAL CONTROL): LAUNCH X431 PRO ELITE car scanner diagnostic tool Features Full bi-directional control ability, to send commands to the vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior & exterior lights, sound horn, test door lock actuators and such.
• Key Programming : >>>>Add, Delete & Reprogram Keys, >>>Rewrite smart keys, All smart keys lost, Replace smart key ECU, Replace KNOB IGNITION;>>>>Reset Key: Relearn a key. (Note: this key programming function is NOT universally compatible .please check compatibility with us if necessary. X431 PRO ELITE supports PINCode reading for most cars before 2008, for vehicles after 2008, you need to have PINCode to do key programming)
• Full Systems Diagnoses In All Vehicle Systems on the ECUs: Read/erase codes, view live data, retrieve ECU version information. It performs active testing and service functions on all systems including ECM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, fuel system, lighting system and A/C system. The functions cover up to 200,000 models worldwide.
• 32+ Maintenance information:There are some practical operation cases uploaded by LAUNCH to help you better understand how to carry out the next step. There are wiring diagrams of specific brands of vehicles in the maintenance materials for reference.
• BRUSH HIDDEN FUNCTION: You will use this function when replacing modules such as audio, radar, windows, etc. It can refresh the car to achieve the effect of the recognition module. Different cars support different module functions.
• MATCHING: This function matches and synchronizes the components with each module after you replace the module, such as Gearbox Matching / A ir Suspension Matching / Seat Matching / Headlight Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Immobilizer Service / Tire Change Reset...etc (depends on specific car models, not for all cars)
• Online Repair Resources: Provide more than 200000+ vehicle models' service & repair information, handbook, repair case and operation skills.
• Maintenance Help: Including How-to Videos, operation skills, user manual, Q&A, Quick Start guide, etc. So you won't have to take it to the Dealers.

 

More than 32 Reset Functions Solving Tricky Problem(Quantity can exceed 100, depending on car model and year)

The LAUNCH X431 PRO ELITE automotive scanner can perform a wide range of actions as well as a number of special functions that make it an even more astonishing piece of equipment. These special functions include but are not limited to :
 
1. ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
 
2. TPMS Reset
When the tire pressure is too low, the tire leaks, the tire pressure monitoring device is replaced or installed, the tire is replaced and the tire pressure sensor is damaged, The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.
 
3. Oil Lamp Reset
Allows you to perform a reset for a new calculation of Engine Oil life system once changed the oil.

4. Electronic Throttle Sensor Reset
To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.
 
5. Injector Coding
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.

6. SAS Reset
It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.

7. Brake-pad Reset
To deactivate and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.

8. Gear Learning
Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
 
9. IMMO Service
To prevent the car from being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

10. Battery Matching
Enables you to perform a resetting operation on the monitoring unit of the battery, in which the original low battery fault information will be cleared.
 
11. DPF Regeneration
It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter systems with DPF.

12. EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is cleaned or replaced.
 
13. Suspension Matching
When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.

14. NOx Sensor Reset
If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

15. Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
 
16. Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory.

17. Stop-start Reset
This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)

18. AC Initialization
AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.

19. AdBlue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.

20. AFS Headlamp Reset
This function enables you to initialize the adaptive headlamp system.

21. A/F Reset
This function is applied to set or learn air/fuel rate parameters.

22. Gearbox Reset
This function enables you to complete the gearbox self-learning to improve gear-shifting quality

23. Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.

24. Transport Reset
To lower vehicle power consumption, the user may perform the following operations: limit vehicle speed, not wake up the network for the door open and disable the remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal.

25. Seat Calibration
This function is applied to match the seats with memory functions that are replaced and repaired.
 
26. High Voltage Battery Detection
This function is used for high-voltage battery diagnosis and status information detection.

27. Sunroof Initialization
This function enables you to set the sunroof to lock off, closed it when it rains, sliding/tilting the sunroof memory function, temperature threshold outside the car, etc.

28. Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.

29. Language Change
This function is used to change the system language of the vehicle center console. note: you need to have a language pack to do a language change

30. Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.

31. Intelligent Cruise Control System Reset
This function is used to match the intelligent cruise control module after it is replaced or repaired.

32. Reset Program (Extension)
(Note: Available maintenance functions vary depending on the vehicle make, year, and model.)

>> One-Click Auto VIN Detect: Smart AutoVIN technology for fast and precise identifying vehicles in one touch to scan E~CUs, acquire vehicle info and run diagnostic on selected systems.Quickly get your car’s information,save your time.

>> 8 IN 1 Live Data Stream Analyse in Graph: LAUNCH X431 PRO ELITE scan tool shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.

>> 2 Years Free Online Update: No subscription fee! This code reader is backed by LAUNCH’s promise for Online updates to keep the software current. Only the official scan tool can get updated.

>> Automatic Diagnostic Report Print & Share: Health Report will scan all vehicle modules and give you a status list for each modules condition .This diagnostic tool can automatically generate a diagnostic report when diagnostic work is successfully finished.The reports are saved to the internal memory for later review. The reports are able to be saved in PDF format, and as the tablet is equipped with WIFI, these can be emailed to the office or directly to the customer.

>> One to One Online Feedback- In-Time Problem Solving: LAUNCH Scanner provides you with a Feedback function to share any problems you encounter in the process of diagnosis. We will make every effort to perform a no-delay problem solving and makes improvements on product quality according to your problems and suggestions, thus offering you a higher quality user experience.

>> Remote Diagnosis: Configures LAUNCH X431 PRO ELITE as an I/M(Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently.

>> Maintenance Help: Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

>> What If I meet with Issues during the diagnosis ?: For any problems found during the diagnosis, submit the feedback immediately. LAUNCH professional experts will provide perfect solutions for you as soon as possible .

>> 100+ Repair Functions For Specific Vehicles (in-vehicle catalog ) Furthermore, the Launch scan tool also developed 300+ functions for specific models. Compared with other diagnostic scanners that can only do the Reset function, the bi-directional scanner can finish deeper and wider Reset, Regeneration, Initiation, Matching, Calibration, Replacement, etc.

Cover 99% Global Car 100000+ Vehicles Supports

American cars:
BUICK, CADILLAC,CHEVROLET, CHRYSLER, DODGE, FIAT(BRAZIL), FORD, FORD(AUSTRALIA) , GM. JEEP, LINCOLI, GM(BRAZIL)

European car:
ABARTH,ALFA ROMEO,AUDI, BENTLEY,BMW,BUGATTI,CITROEN, DACIA,EUROFORD, FERRARI, FIAT, GAZ, OPEL(SOUTHAFRICA),IVECO.JAGUAR,LAMBORGHINI,LANCIA,LANDROVE,MASERATI,MAYBACH,,MERCEDES,MINI,OPEL,PEUGEOT,PORSCHE,RENAULT, ROLLSROYCE,ROVER,SAAB,SEAT,SKODA,SMART,SPRINTER, ,VAUXHALL,VAZ,VOLVO,VW ,ASTONMARTIN,UAZ

Asian cars：
ACURA,DAEWOO,DAIHATSU,HOLDEN(AUSTRALIA),HONDA,HYUNDAI,INFINITI,ISUZU, KIA,LEXUS,LUXGEN,MAHINDRA,MAHINDRA(INDIAN),MARUTI,MARUTI(INDIAN),MAZDA,MITSUBISHI ,NISSAN,GTR(NISSAN),PERODUA,PERODUA (MALAYSIA,PROTON,PROTON(MALAYSIA,SAMSUNG,SAIPA,SSANGYONG,SUBARU,SUZUKI,TATA,TATA(INDIAN), TOYOTA ,UNITED PAKISTAN

Chinese car：
BRILLIANCE,BYD,CHANGAN,CHANGHE,CHBUICK,CHERY,CHANGHE,SUZUKI,DFCIROEN,ECUAID,FAW(TIANJIN FOTON,GONOW,GWM, HAFEI,HAIMA,JAC,JAC,REFINE,JMC,JOYLONG,LIFAN ,MG(SAIC,QOROS,MAXUS,SGM,SGMW,XINKAI,POLARSUN,ZX,AUTO,ZOTYE,SENOUA(BAIC)

Guide Functions

Teach step by step how to use the diagnostic cart
(Compatible with Volkswagen / Audi / Skoda / Seat): for various systems such as engine, gearbox, brake, airbag, instrument, air conditioner, and more.

Supports CANFD and DIOP protocol now , it supports For GM after 2020 and other New cars

it is the only product in this price range that is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.
Supports For Chevrolet Onix 2020-2021 year 
Supports For Chevrolet Tracker 2020 year 
Supports For Chevrolet Suburban 2021 year 
Supports For Chevrolet Tahoe 2021 year 
Supports For Buick
Supports For Cadillac Escalade 2021 year 
Supports For Cadillac Escalade 2021 year 
Supports For GMC Yukon 2021 year 
Supports For GMC Yukon XL 2021 year
Supports For Holden
Supports For DAEWOO
Supports For Alpheon
Supports For Ravon 
Supports For Pontiac 
Supports For Saturn 
Supports For Hummer

DoIP

With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes LAUNCH X431 PRO ELITE save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).

25 Language Supports

English，French，Spanish，German，Russian，Korean，Japanese，Portuguese，Italian，Polish ，Dutch，Hungarian，Finnish，Czech，Turkish，Greek，Arabic，Danish，Romanian，Serbian，Swedish，Traditional Chinese，Thai，Persian，Simplified Chinese

Why Choose X431 PRO ELITE

1. The host has a higher version of the system, larger storage, and longer endurance, making diagnosis faster, more stable, and more durable
2. Support CANFD and DOIP
3. Wide coverage of vehicle models, strong diagnostic functions, supporting full vehicle and system diagnosis
4. Support for reading version information, reading code, clearing code, reading data stream, action testing, code setting, matching, etc
5. Support for Volkswagen Audi guidance function, support for tire pressure activation, programming, learning, and detection with tire pressure gun
6. Support for anti-theft programming and other functions in conjunction with X-PROG 3
7. Multiple expansion module support: endoscope, BST-360, oscilloscope, sensor, wifi printer
8. Support 32 special functions such as maintenance light reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset, etc
9. Support VIN code intelligent recognition function for quick diagnosis
10. Quick and accurate diagnosis

Package List: