GODIAG GT100+ GT100 Pro Breakout Box ECU Tool with BMW CAS4 CAS4+ and FEM BDC Test Platform Support All Key Lost

GODIAG GT100+ Breakout Box ECU Tool with BMW CAS4 CAS4+ and FEM BDC Test Platform

Highlights:

1. Best Choice for Engineers or Automotive Workshop:
with GODIAG GT100+, can support communication detection and ECU maintenance/ diagnosis/ programming/ coding, will make your work more simple and easier, save your time and money.
with GODIAG BMW CAS4 CAS4+ Test Platform, can support All Key Lost, Add New Key, Synchronize Test and Troubleshooting.
with GODIAG FEM BDC Test Platform, can support to program new key when all keys lost, can add new key to BMW FEM BDC vehicle on bench.

2. Adds Electronic Current Display. You can intuitively see the current display of the ECU by connecting the ECU module with the Banana interface or the DB25 cable, which can make your work much easier.

3. Compatiable with most device to do test which make your operation much easier, such as Xhorse vvdi2, Autel IM608, Launch Scanner, Foxwell and Vident Scanner etc.

4. Fast Shipping with Best Quality.
 
HighLights for GODIAG GT100+:

1. New generation of GT100, Adds Electronic Current Display. You can intuitively see the current display of the ECU by connecting the ECU module with the Banana interface or the DB25 cable, which can make your work much easier.
2. ECU connection + OBDII Protocol Detector + Electronic Current Display.
3. Able to connect the single modules or multiple modules of the vehicle.
4. It can be connected with any diagnostic tool to tell whether the car communication is good or not.
5. Can work with the most devices to do tests, will make your operation much easier, such as xhorse vvdi2, Autel Scanner, Launch Scanner, Vident Scanner, and so on.
6. It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost,automatically locked,the key remote control fails and the fault light turns on.
7. Guarantee: One Year Warranty.
8. Can together with BMW CAS4 CAS4+ and BMW FEM BDC Test Platform to program keys.

Highlights of GODIAG CAS4 CAS4+ Test Platform:

1. By working together with Godiag GT100, Xhorse VVDI2, VVDI BIM Tool Pro, Lonsdor k518 and Autel im608 etc, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module. 
2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction.
3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access).
4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.

Highlights of GODIAG FEM BDC Test Platform:

When making keys, BMW F series FEM & BDC all need to preprocess the IMMO box. If there is no test platform, it needs to disassemble and install the control unit in the car back and forth.
Using our test platform can be completed on the bench which will be both economical and convenient.

Godiag FEM / BDC programming test platform 5 major features:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system.
2. Perform the synchronization test for the programmed FEM/BDC and the key
3. Provide a test environment for the engineers who professionally recycle FEM/BDC.
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly.
5. Provide professional engineers with connecting FEM BDC modules and instrument.

Package includes:

1pc x Host
1pc x OBD 2-in-1 extension cable
1pc x Colored jumper cable
1pc x Power supply 12V
1pc x Resistance 120 ohm
6pcs x Banana plug
24pcs xWire accessories, Dupont 2.54mm connector female pin
1pc x BMW CAS4 & CAS4+ Programming Test Platform
1pc x BMW FEM BDC Programming Test Platform
2pc x GODIAG OBD2 to OBD25